Fortinet Technologies Inc. Page 235 FortiVoice Enterprise Phone System 4.0.0 Administration Guide
5. Click Create.
Configuring other fax settings
Configure the station IDs, fax header, T.38 fax options, and fax sending queue for outgoing
faxes.
To configure fax settings
1. Go to Call Features > Fax > Setting.
2. Configure the following:
Figure 89: Fax settings
GUI field Description
System station ID Enter a station ID that shows on each fax sent from the
FortiVoice unit.
System fax header Enter a fax subject header that shows on each fax sent from
the FortiVoice unit.
T.38 Fax
Initiate a T.38
reinvite if the
remote end does
not
Select if the fax receiving terminal does not reply to a T.38
invitation.
Fallback to audio
(G.711) mode on
T.38 failure
Select to use G.711 mode if T.38 communication fails.
Send Queue
Max retry times Enter the maximum number of times to resend a fax. This is
useful if a fax cannot be sent due to busy lines or other
reasons.
To Next Page
Loading...
