Fortinet Technologies Inc. Page 250 FortiVoice Enterprise Phone System 4.0.0 Administration Guide
5. Click Create.
Figure 95: Sample report with Report column as Caller and Sort column as Duration
Configuring the report time period
When configuring a report profile, you can select the time span of log messages from which to
generate the report.
To configure the report time period
1. Go to Log & Report > Call Report > Call Report.
2. Expand Period.
3. Select the time span option you want. This sets the range of log data to include in the report.
• For Type, choose a relative time, such as Today, Yesterday, Last N hours, and so on. If you
select an option with an unspecified “N” value, enter the number of hours, days or weeks
in the Value field, as applicable.
• Set a specific time range. Set the start date and hour in From field and end date and hour
in To field.
Sort column Select the value for filtering the call information. The caller or receiver
with the higher value moves to the top of the table.
If you select Report column, the sort column value is equal to what
you select in the Report column field.
For details, see Figure 95 on page 250.
Separate table Depending on the query values, if a report table is too long, it can be
divided into separate tables. Selecting Default keeps the pre-defined
table settings of the query values and is recommended.
You can select to enable or disable the pre-defined table settings of
the query values, although this is not recommended.
Report column
Sort column
Note: Since the sort column is Duration and the call time of caller 80@61 <80> is longer, this
caller is placed before caller 6819 <6819>.
Call duration of caller
80@61 <80>
Call duration of caller
6819 <6819>
To Next Page
Loading...
