Fortinet Technologies Inc. Page 198 FortiVoice Enterprise Phone System 4.0.0 Administration Guide
5. Click Create.
Configuring call handling actions
Configure the call handling action for the numbers matching the configured number pattern and
the caller IDs matching the caller ID pattern.
To configure the call handling action
1. Go to Call Routing > Outbound > Outbound.
2. Click New.
3. In Call Handling, click New.
4. Configure the following:
Prefix Add a number before a pattern, such as area code.
For example, if your Match Pattern is 123XXXX and its area
code is 555, you can enter 555 for the Prefix. When you dial a
number under this pattern, you do not need to dial the area
code 555.
Postfix Add a number after a pattern.
For example, if your Match Pattern is 9XXX and the numbers
under this pattern have been upgraded to have an additional
digit 5 at the end, you can enter 5 for the Postfix. When you dial
a number under this pattern, you do not need to dial the last
digit 5.
GUI field Description
Call Handling
Schedule Select the FortiVoice operation schedule to implement this
plan. Click Edit to modify the selected schedule or click New to
configure a new one. For more information on PBX schedule,
see “Scheduling the FortiVoice unit” on page 118.
Action Select the call handling action for the numbers matching the
configured number pattern and the caller IDs matching the
caller ID pattern.
Outgoing trunk Select the trunk for the outbound calls. Click Edit to modify the
selected trunk or click New to configure a new one. For more
information on trunks, see “Configuring Trunks” on page 167.
Caller ID
modification
Select the caller ID modification configuration. Click Edit to
modify the selected configuration or click New to configure a
new one. For more information on caller ID modification, see
“Modifying caller IDs” on page 117.
To Next Page
Loading...
