Fortinet Technologies Inc. Page 266 FortiVoice Enterprise Phone System 4.0.0 Administration Guide
Appendix A: Installing Click-to-Dial
software
If you use MicroSoft Outlook, you can install the FortiVoice Click-to-Dial plugin to dial the phone
numbers of your contacts.
For information on installing the software, go to FortiVoice Click-to-Dial Software Installation.
Step 4 in the instructions is specific to FortiVoice 40/70/100 models. For FortiVoice
200D/200D-T, do the following:
• System IP Address: Enter the FortiVoice IP address. For details, see “Configuring the
network interfaces” on page 40.
• User Extension #: Enter the user ID of the extension. For details, see “Configuring IP
extensions” on page 130.
• Password: Enter the password used for configuring your SIP phone from the phone or the
Web. For details, see “Configuring IP extensions” on page 130.
To Next Page
Loading...
