Fortinet Technologies Inc. Page 237 FortiVoice Enterprise Phone System 4.0.0 Administration Guide
3. Click Apply.
Modifying feature access codes
By default, the FortiVoice unit defines the following codes for users to access certain features
by dialing the codes. You can go to Call Features > Feature Code > Feature Code and
double-click a feature name to modify its code and description, but that does not change the
Destination Select an archiving destination:
• Local: the FortiVoice unit’s local hard drive or a NAS server.
• Remote: a remote FTP or SFTP storage server.
Local disk quota If Local is the archiving destination, enter the disk space quota.
The total disk quota for archiving calls cannot exceed 20% of the
total data disk size. For example, if the data disk has a size of 100
GB, a maximum of 20 GB can be used for fax archiving.
If this quota is met and a new fax must be archived, the
FortiVoice unit either automatically removes the oldest fax archive
folder in order to make space for the new archive or stops
archiving, depending on the settings you specify under “Rotation
Settings” on page 220.
If Remote is the archiving destination, configure the following:
Protocol Select the protocol that the FortiVoice unit will use to connect to
the remote storage server, either SFTP or FTP.
IP address Enter the IP address of the remote storage server.
User name Enter the user name of an account the FortiVoice unit will use to
access the remote storage server, such as FortiVoice.
Password Enter the password for the user name of the account on the
remote storage server.
Remote directory Enter the directory path on the remote storage server where the
FortiVoice unit will store archived calls, such as
/home/fortivoice/call-archives.
Remote cache
quota
Enter the FortiVoice cache quota that is allowed to be used for
remote host archiving. The above statement regarding the Local
disk quota also applied to the cache quota.
To Next Page
Loading...
