Fortinet Technologies Inc. Page 196 FortiVoice Enterprise Phone System 4.0.0 Administration Guide
Creating dialed number match
You can create one extension number pattern in your dial plan that matches many different
numbers for outbound calls.
The numbers matching this pattern will follow this dial plan rule.
The FortiVoice unit supports the following pattern-matching syntax:
Syntax Description
X Matches any single digit from 0 to 9.
Z Matches any single digit from 1 to 9.
N Matches any single digit from 2 to 9.
[15-7] Matches a single character from the range of digits specified. In this case, the
pattern matches a single 1, as well as any number in the range 5, 6, 7.
. Wildcard match; matches one or more characters, no matter what they are.
! Wildcard match; matches zero or more characters, no matter what they are.
Test Click to start the dry run test and view the Test result.
Reset Click to remove the test result in order to start a new test.
Test Call Test the outbound dial plan by making a real phone call.
Destination number Enter a destination number to call.
After call is
established
Select the FortiVoice action once it calls the destination
number:
• Play welcome message: The FortiVoice unit will play a
message to the destination number.
• Connect test call to number: In the Number field, enter the
number from which you want to call the destination
number. The FortiVoice unit will connect this number with
the destination number to test the trunk.
Test Click to start the test and view the Test result.
Reset Click to remove the test result in order to start a new test.
Table 24:Pattern-matching syntax
Table 25:Pattern-matching examples
Pattern Description
NXXXXXX Matches any seven-digit number, as long as the first digit is 2 or higher.
NXXNXXXXXX This pattern matches with areas with 10-digit dialing.
To Next Page
Loading...
