Fortinet Technologies Inc. Page 52 FortiVoice Enterprise Phone System 4.0.0 Administration Guide
4. Click Create.
Configuring administrator profiles
The Admin Profile tab displays a list of administrator access profiles.
Administrator profiles govern which areas of the web-based manager and CLI that an
administrator can access, and whether or not they have the permissions necessary to change
the configuration or otherwise modify items in each area.
To configure administrator access profiles
1. Go to System > Admin > Admin Profile.
2. Either click New to add an account or double-click an access profile to modify it.
3. In Profile name, enter the name for this access profile.
Trusted Hosts Enter an IPv4 or IPv6 address or subnet from which this
administrator can log in.
If you want the administrator to access the FortiVoice unit from any
IP address, use 0.0.0.0/0.0.0.0.
Enter the IP address and netmask in dotted decimal format. For
example, you might permit the administrator to log in to the
FortiVoice unit from your private network by typing
192.168.1.0/255.255.255.0.
Note: For additional security, restrict all trusted host entries to
administrative hosts on your trusted private network. For example, if
your FortiVoice administrators log in only from the 10.10.10.10/24
subnet, to prevent possibly fraudulent login attempts from
unauthorized locations, you could configure that subnet in the
Trusted Host #1, Trusted Host #2, and Trusted Host #3 fields.
Note: For information on restricting administrative access protocols
that can be used by these hosts, see “Editing network interfaces” on
page 41.
Click the + sign to add additional IP addresses or subnets from
which the administrator can log in.
Admin profile Select the name of an admin profile that determines which functional
areas the administrator account may view or affect.
Click New to create a new profile or Edit to modify the selected
profile. For details, see “Configuring administrator profiles” on
page 52.
Select language Select this administrator account’s preference for the display
language of the web-based manager.
Select theme Select this administrator account’s preference for the display theme
or click Use Current to choose the theme currently in effect.
The administrator may switch the theme at any time during a session
by clicking Next Theme.
To Next Page
Loading...
