Fortinet Technologies Inc. Page 252 FortiVoice Enterprise Phone System 4.0.0 Administration Guide
Generating a report manually
You can always generate a report on demand whether the report profile includes a schedule or
not.
To manually generate a report
1. Go to Log & Report > Call Report > Call Report.
2. Click to select the report profile whose settings you want to use when generating the report.
3. Click Generate.
The FortiVoice unit immediately begins to generate a report. To view the resulting report, see
“Viewing generated reports” on page 31.
Setting call rates
The Log & Report > Call Report > Rate tab lets you set call rates for calculating phone bills.
GUI field Description
Name Enter a name for the rating profile.
Trunk Select the trunk that will use the rates.
Local Enter the rate for local phone calls.
Long distance Enter the rate for long-distance phone calls.
International Enter the rate for international phone calls.
Other rate Enter the rate for other types of phone calls.
Comment Enter any notes you have for this rating profile.
To set call rates
1. Go to Log & Report > Call Report > Rate and click New.
2. Configure the following:
Figure 96: Setting call rate
3. Click Create.
To Next Page
Loading...
