Fortinet Technologies Inc. Page 47 FortiVoice Enterprise Phone System 4.0.0 Administration Guide
Figure 16:DHCP server configuration
GUI field Description
Network Interface
Setting
ID The system will generate an ID for this configuration. This is view
only.
Enabled Select to enable the DHCP server.
Interface Select an interface for the DHCP server from the drop-down list.
If this FortiVoice is in HA mode, make sure that the slave unit has
the same interface as the master unit. For information on HA,
see “Using high availability” on page 53.
Gateway Enter the IP address of the default gateway that the DHCP
server assigns to DHCP clients.
DNS options Select to use either a specific DNS server or the system’s DNS
settings.
If you select a specific DNS server, enter the Primary DNS server
and the Secondary DNS server fields.
For more information, see “Configuring DNS” on page 46.
Domain Enter the domain that the DHCP server assigns to its clients.
Netmask Enter the netmask of the addresses that the DHCP server
assigns.
Advanced Setting
To Next Page
Loading...
