Fortinet FortiVoice - Page 194

Fortinet Technologies Inc. Page 194 FortiVoice Enterprise Phone System 4.0.0 Administration Guide
To set up an outbound dial plan
1. Go to Call Routing > Outbound > Outbound.
2. Click New.
3. Configure the following:
Figure 72: Outbound dial plan
Pattern The phone number pattern in the dial plan that matches other numbers.
For details, see “Dialed Number Match” on page 194.
Match CID The caller ID pattern for this dial plan. For details, see “Caller ID Match”
on page 195.
Call handling The call handling action for the numbers matching the configured
number pattern and the caller IDs matching the caller ID pattern. For
details, see “Call Handling” on page 195.
GUI field Description
Name Enter a name for this plan.
Enable Select to activate this dial plan.
Emergency call Select to allow emergency call with this plan. By default, this is
selected.
For information on setting emergency number, see “Setting PBX
location and contact information” on page 98.
Dialed Number
Match
With dialed number pattern matching, you can create one phone
number pattern in your dial plan that matches many different
numbers.
The dialed numbers matching this pattern will follow this dial plan
rule.
For information on adding a dialed number match, see “Creating
dialed number match” on page 196.