Fortinet FortiVoice - Page 171

Fortinet Technologies Inc. Page 171 FortiVoice Enterprise Phone System 4.0.0 Administration Guide
Registration Enter the SIP registration information from the VoIP service
provider by selecting a registration method. You can receive
calls after registering with the SIP server of the VoIP service
provider.
• Enable registration: Select to activate the registration with
the VoIP service provider. This trunk is ready to use.
• Standard: Select to use the standard registration method
which automatically registers with the SIP server of the
VoIP service provider.
• Registrar: Select to enter the registration information from
the VoIP service provider:
• Registrar host/IP: Enter the VoIP service provider’s SIP
registration server domain name or IP address. For
example, 172.20.120.11 or voip.example.com.
• Registrar port: Most SIP configurations use TCP or
UDP port 5060 for SIP sessions. If your VoIP service
provider uses a different port for SIP sessions, enter the
port number.
• Transport protocol: Select the transport protocol used
for the registration.
• Registration URI: Enter the registration string provided by
the VoIP service provider in the Registration URI field.
The string usually has the following formats:
register => user[:secret[:authuser]]@host
[:port][/extension]
or
register => fromuser@fromdomain:secret@host
or
register => fromuser@fromdomain:secret:
authuser@host:port/extension
For example, a string could be: register =>
2345:password@mysipprovider.com/1234
Outbound Proxy Some VoIP service providers use proxy servers to direct its
traffic. If this is the case, your registration request will go to
the proxy server first before reaching the registration server.
Configure the following:
• Enable proxy: Select to activate the proxy server settings.
• Proxy host/IP: Enter the proxy server’s domain name or IP
address. For example, 172.20.120.11 or
voip.example.com.
• Proxy port: Enter the port number of the proxy server.
• Transport protocol: Select the transport protocol used for
the registration.
Fax Configure fax and phone signal automatic detection and fax
handling.
Automatic fax
detection
Select for the FortiVoice unit to detect incoming fax signal on
this trunk automatically.