Fortinet FortiVoice - Page 231

Fortinet Technologies Inc. Page 231 FortiVoice Enterprise Phone System 4.0.0 Administration Guide
4. Click Create.
Testing dial plans for sending faxes
After you create a dial plan, you can select the dial plan and click Test to see if the dial plan
works.
For more information, see “Test” on page 230.
To test a dial plan
1. Go to Call Features > Fax > Sending Rule.
2. Select the dial plan that you want to test and click Test.
The call test page appears.
3. Configure the following:
Figure 87: Testing dial plans
Enabled Select to activate this dial plan.
Dialed Number Match With dialed number pattern matching, you can create one
phone number pattern in your dial plan that matches many
different numbers.
The dialed numbers matching this pattern will follow this dial
plan rule.
For information on adding a dialed number match, see
“Creating dialed number match” on page 232.
Call Handling Click New to configure the call handling action for the
numbers matching the configured number pattern. For details,
see “Configuring call handling actions” on page 234.
GUI field Description
Test Call - Dry Run Run a system outbound dial plan test without making a real
phone call.
Destination number Enter a destination number to call.
From number Enter the number from which you want to call the destination
number. The FortiVoice unit will connect this number with the
destination number for the test.