Fortinet FortiVoice - Page 77

Fortinet Technologies Inc. Page 77 FortiVoice Enterprise Phone System 4.0.0 Administration Guide
3. Click Apply.
Password / PIN
Policy
Displays the SIP password and user PIN policy for administrators
and extension users. For information on setting SIP password and
user PIN, see “Configuring IP extensions” on page 130.
• Enable: Select to enable the password/PIN policy.
• Minimum password length: Set the minimum acceptable length
(8) for passwords.
• Password must contain: Select any of the following special
character types to require in a password. Each selected type
must occur at least once in the password.
• Uppercase letters — A, B, C, ... Z
• Lowercase letters — a, b, c, ... z
• Number — 0 ... 9
• Non alphanumeric character — punctuation marks, @,#, ... %
• Apply password policy to: Select where to apply the password
policy:
• Administrators — Apply to administrator passwords. If any
password does not conform to the policy, require that
administrator to change the password at the next login.
• SIP users — Apply to FortiVoice SIP phone users’ passwords.
If any password does not conform to the policy, require that
user to change the password at the next login.
• Minimum PIN length: Set the minimum acceptable length (6) for
the user PIN.
• PIN must contain:
• Number: Select to include a number (0-9) in the PIN.
• PIN special: Select to include * or # or both in the PIN.
• Apply PIN policy to: Select Voicemail users to apply the policy to
FortiVoice phone users’ user PIN. If any PIN does not conform to
the policy, require that user to change the PIN at the next login.
Administration
Ports
Specify the TCP ports for administrative access on all interfaces.
Default port numbers:
HTTP: 80
HTTPS: 443
SSH: 22
TELNET: 23
Web action host/IP Enter the host name or IP address from where a email notification is
sent to you when a voice mail or fax is delivered to your extension.
This IP address is included in the email notification. You can open
the link to view or manage the voice mail or fax. If you leave this field
empty, port1 IP will be used instead.
The value entered here replaces the default Url host variable for
customizing messages. See “Customizing email history report and
notification email templates” on page 102.