Fronius TPS/i COMPACT - Smartmanager - the Power Source Website; General; Calling up the Power Source Website; Changing Password; Logging off

SmartManager - The power source website
General The power source has its own website: SmartManager.
As soon as the power source is connected to a computer using a network cable,
or is on a network, the power source's SmartManager can be retrieved using the
power source's IP address.
At least IE 10 or a similar modern browser is required to access SmartManager.
The entries displayed on SmartManager may vary depending on system configur-
ation, software upgrades and available options.
Examples of entries displayed:
-
Current system data
-
Documentation, logbook
-
Job data
-
Power source settings
-
Backup & restore
-
User management
-
Signal visualisation
-
Overview
-
Update
-
Function packages
-
Characteristics overview
-
Screenshot
-
Robot interface *
* Depending on the available robot interface, the name of the interface will
be displayed as an entry on the website.
Calling up the
power source
website
1
Setup menu / Settings / System / Information ==> note the IP address of the
power source (IP)
2
Enter the IP address in the browser search field
3
Enter user name and password
Factory setting:
User name = admin
Password = admin
The power source website is displayed.
Changing pass-
word / logging
off
By clicking this symbol
-
the user password can be changed
-
you can log out of SmartManager
Changing the password for the SmartManager:
1
Enter the old password
2
Enter the new password
3
Repeat the new password
4
Click on "Save"
137
EN