Updating firm-
ware
IMPORTANT! To update the firmware you need a PC or laptop that is connected
to the power source via an Ethernet network.
1
Get latest firmware (e.g. from the Fronius Download Center)
File format: official_tpsi_x.x.x-xxxx.ffw
2
Establish Ethernet connection between PC/laptop and power source
3
Open the power source SmartManager (see page 137)
4
Transfer the firmware to the power source (see page 145)
Disposal Dispose of in accordance with the applicable national and local regulations.
155
EN
To Next Page
Loading...
