General
Device concept The TPS 270i C MIG/MAG power
source is a completely digitised, micro-
processor-controlled inverter power
source with integrated 4-roller wire
drive.
The modular design and potential for
system add-ons ensure a high degree
of flexibility.
Its compact design makes the TPS
270i C particularly suitable for mobile
applications.
The power source can be adapted to
any specific situation.
Functional prin-
ciple
The central control and regulation unit of the power sources is coupled with a di-
gital signal processor. The central control and regulation unit and the signal pro-
cessor control the entire welding process.
During the welding process, the actual data is measured continuously and the
device responds immediately to any changes. Control algorithms ensure that the
desired target state is maintained.
This results in:
-
a precise welding process
-
exact reproducibility of all results
-
excellent weld properties.
Application
areas
The devices are used in trade and industry for manual applications with classical
steel, galvanised sheets, chrome/nickel and aluminium.
The integrated 4-roller wire drive, high performance and low weight of the power
source makes it the ideal choice for portable applications on building sites or in
repair workshops.
23
EN
To Next Page
Loading...
