Fronius TPS/i COMPACT - Retrieving the Currently Set Filler Metal; Selecting the Filler Metal

1
Press the "Welding process" button until the LED for the desired welding pro-
cess lights up
2
Press the "Mode" button until the LED for the desired operating mode lights
up
Retrieving the
currently set
filler metal
1
42
-
5
/
1
Press the "Filler metal info" button
The LED on the button lights up and the currently set filler metal is shown on the
display:
2
Turn the right adjusting dial
The currently set wire diameter is shown on the display:
3
Turn the right adjusting dial
The currently set shielding gas is shown on the display:
4
Turn the right adjusting dial
The currently set characteristic is shown on the display:
5
Press the "Filler metal info" button
The currently set welding parameter values are shown on the display.
Selecting the
filler metal
1
2
3
...
...
82