Fronius TPS/i COMPACT - Backup & Restore; General Remarks

Backup & Restore
General remarks In the backup & restore entry
-
all welding system data can be saved as a backup (e.g. current parameter set-
tings, jobs, user characteristics, defaults, etc.),
-
any backups will be restored to the welding system
-
You can select which data you would like to be backed up automatically.
Backup & Re-
store
Starting backup
1
Click on "Start backup" to save a backup of the welding system data
The data is saved in a selected location in the default format MCU1-YYYYM-
MDDHHmm.fbc.
YYYY = Year
MM = Month
DD = Day
HH = Hour
mm = Minute
The date and time correspond to the power source settings.
Searching for a restore file
1
Click on "Search restore file" to transfer an available backup to the power
source
2
Select the file and click on "Open"
The selected backup file is displayed on the power source SmartManager un-
der "Restore".
3
Click on "Start recovery"
Once the data has been successfully restored, a confirmation to this effect is
displayed.
142