Automatic
backup
1
Enable interval settings
2
Enter the intervals at which the automatic backup should take place:
-
Interval:
daily / weekly / monthly
-
At:
time (hh:mm)
3
Enter the data for the backup destination:
-
Protocol:
SFTP (Secure File Transfer Protocol) / SMB (Server Message Block)
-
Server:
Enter IP address of the destination server
-
Port:
Enter port number; if no port number is entered, the default port 22 is
automatically used.
If SMB is set under Protocol, leave the Port field blank.
-
Storage location:
This configures the subfolder where the backup will be stored.
If no storage location is entered, the backup is stored in the root direct-
ory of the server.
IMPORTANT! For SMB and SFTB, always enter the storage location with
a slash "/".
-
Domain/user, password:
User name and password - as configured on the server;
When entering a domain, first enter the domain, then backslash "\" and
then the user name (DOMAIN\USER)
4
If a connection via proxy server is required, activate and enter the proxy set-
tings:
-
Server
-
Port
-
Users
-
Password
5
Save changes
6
Trigger automatic backup
If you have any questions about the configuration, contact your network adminis-
trator.
143
EN
To Next Page
Loading...
