Fronius Weld-
Connect
The mobile application Fronius WeldConnect can also be called up in
the "Update" entry.
WeldConnect is an app for wireless interaction with the welding sys-
tem.
The following functions can be performed with WeldConnect:
-
Current unit configuration at a glance
-
Mobile access to the SmartManager of the power source
-
Automatic determination of the output parameters for MIG/MAG and TIG
-
Cloud storage and wireless transmission to the power source
-
Part identification
-
Logging in and out of the power source without an NFC card
-
Saving and sharing parameters and jobs
-
Data transfer from one power source to another by means of backup, restore
-
Firmware update
Fronius WeldConnect is available in the following forms:
-
As an Android app
-
As an Apple/IOS app
Further information on Fronius WeldConnect is available at:
https://www.fronius.com/en/welding-technology/innovative-solutions/weldconnect
146
To Next Page
Loading...
