Fronius TPS/i COMPACT - Minimum Equipment Needed for Welding Task; General; MIG;MAG Gas-Cooled Welding; MIG;MAG Water-Cooled Welding

Minimum equipment needed for welding task
General Depending on which welding process you intend to use, a certain minimum equip-
ment level will be needed in order to work with the power source.
The welding processes and the minimum equipment levels required for the weld-
ing task are then described.
MIG/MAG gas-
cooled welding
-
Power source
-
Grounding (earthing) cable
-
MIG/MAG welding torch, gas-cooled
-
Shielding gas supply
-
Wire electrode
MIG/MAG wa-
ter-cooled weld-
ing
-
Power source
-
Cooling unit
-
Grounding (earthing) cable
-
MIG/MAG welding torch, water-cooled
-
Shielding gas supply
-
Wire electrode
Manual CMT
welding
-
Power source
-
Standard, Pulse and CMT welding packages enabled on the power source
-
Grounding cable
-
PullMig CMT welding torch incl. CMT drive unit and CMT wire buffer
IMPORTANT! For water-cooled CMT applications, a cooling unit is also re-
quired!
-
OPT/i PushPull
-
CMT interconnecting hosepack
-
Wire electrode
-
Gas connection (shielding gas supply)
TIG DC welding
-
Power source
-
Grounding (earthing) cable
-
TIG gas-valve torch
-
Gas connection (shielding gas supply)
-
Filler metal (depending on the application)
MMA welding
-
Power source
-
Grounding (earthing) cable
-
Electrode holder with welding cable
-
Rod electrodes
59
EN