Setting range: -10 - +10
Factory setting: 0
- .... shorter arc length
0 ... neutral arc length
+ ... longer arc length
Welding voltage
1)
in V
Setting range: depends on the welding process and welding program selected
Before the start of welding, the device automatically displays a standard value
based on the programmed parameters. The actual value is displayed during weld-
ing.
Pulse/dynamic correction
for influencing the short-circuiting dynamic at the instant of droplet transfer
Setting range: -10 - +10
Factory setting: 0
- ... harder and more stable arc
0 ... neutral arc
+ ... soft and low-spatter arc
Special function
any parameter can be assigned to this (see page 51)
The function can be selected if a parameter has been saved.
92
To Next Page
Loading...
