Copyright © 2016 Frontier Communications. All Rights Reserved.
• Users – creates and manages remote users
• Quality of Service (QoS) – contact Technical Support for detailed
information
UTILITIES
• Local Administration – allows you to grant local SSH access
• Remove Administration – detailed in Chapter 6 Configuring Your
Network Settings 8.1a/ DIAGNOSTICSYou can use diagnostics
to test network connectivity. To diagnose network connectivity:
1. Select Diagnostics in the Advanced page.
2. To ping an IP address, enter the IP address or domain name in
the Destination field and click Go. The diagnostics will
display the number of pings, status, packets sent, and round
trip time. If no diagnostic status displays, click Refresh in
your web browser.
3. Click Close to exit the session. 8.1b/ RESTORE DEFAULTS
You can restore your configuration settings to your Gateway factory
default settings. Restoring the default settings erases the current
configuration, including user defined settings and network connections.
All connected DHCP client must request new IP addresses. Your
Gateway must restart.
Prior to restoring the factory defaults, you may want to save your
current configuration to a file. This allows you to reapply your current
settings and parameters to the default settings, as needed. For
additional information, refer to the Configuration File section.
To Next Page
Loading...
