Copyright © 2016 Frontier Communications. All Rights Reserved.
7. Enter the key code. If using a HEX key, each character
mustbealetterfromAtoForanumberfrom0to9.If the key is ASCII,
each character can be either any ASCII or alphanumeric character.
If using 64/40 bit, enter 10 HEX or 5 ASCII/alphanumeric
characters. If 128/104, enter 26 HEX or 13 ASCII/ alphanumeric
characters.
8. Be sure to write down the wireless settings for future use. Other
wireless devices that will be connected to your Gateway must be
configured to use these settings to join your Gateway’s wireless
network.
9. Click Apply to save changes.
You can change your advanced wireless security settings, such as
configuring wireless encryption to help protect your network from
unauthorized access or damage to your network devices; disable your
SSID broadcast to secure your wireless traffic; stop your Gateway from
broadcasting your SSID; set Wireless MAC Authentication to limit access
to specific wireless devices; and change the wireless mode to limit or
allow access to your wireless network based on the type of technology
as well as other advanced wireless options.
To modify the security settings for either 2.4 GHz or 5 GHz:
1. In the Wireless Settings page, select Advanced Security Settings.
3.3a/ LEVEL 1: SECURING YOUR NETWORKIn the Level 1 section,
select the type of wireless security. Depending
on your selection, one of the following pages displays.
3.3/ ADVANCED SECURITY SETTINGS
To Next Page
Loading...
