Copyright © 2016 Frontier Communications. All Rights Reserved.
In most cases, this only requires the pressing of two buttons – one on
your Gateway and one on the wireless client. This could be either a
built-in button or one on a compatible wireless adapter/card, ora
virtual button in software. Once completed, this allows wireless clients
to join your wireless network.
To initialize the WPS process, you can either press and release
the WPS button located on the front of your Gateway or use the
GUI and press the on-screen button.
You can easily add wireless devices to your wireless network using the
WPS option if your wireless device supports the WPS feature.
To access WPS using the user interface:
1. From the Main menu, select Wireless Settings, then select Wi-Fi
Protected Setup (WPS).
2. Enable the protected setup by moving the selector to On.
To Next Page
Loading...
