Copyright © 2016 Frontier Communications. All Rights Reserved.
• IPv6 LAN Configuration (select Stateless from the drop- down list) as
shown in drop-down list and page below:
• LAN IPv6 Link Local Address (automatically populated)
• Router Advertisement Lifetime (minutes between 0-150)
• Interfaces - check one or more of the box(s) to apply IPv6 LAN settings
to the selected interfaces:
– Ethernet/Coax IPv6 Enabled
– Wireless Access Point 1 IPv6 Enabled
– Wireless Access Point 2 IPv6 Enable
3. After entering all appropriate IPv6 settings click Apply to have
changes take effect.
8.4b/ ROUTING SETTINGSYou can view the routing and IP address
distribution rules as well as
add, edit, or delete the rules.
To view the rules:
1. Select Routing in the Advanced page.
2. To add a new Gateway, click Add New Route.
3. Specify the following parameters:
• Name – select the network type.
• Destination - enter the destination IP of the destination host, subnet
To Next Page
Loading...
