Copyright © 2016 Frontier Communications. All Rights Reserved.
USING ADVANCED SETTINGS AND UTILITIES
Caution: Many of the settings described in this section should only be
configured by experienced network technicians. Changes could adversely
affect the operation of your Gateway and local network.
8.0/ USING ADVANCED SETTINGS You can access the following
settings:
UtilitiesDNS SettingsNetwork Settings Configuration Settings
To access the advanced settings:
Date & Time Routing
1. Select Advanced. A warning page displays, asking if you want to
proceed.
2. Click Yes. The Advanced page displays.
3. Select a topic by clicking the topic name.
8.1/ UTILITIES
You can access the following advanced settings:
• Diagnostics – performs diagnostic tests
• Restore Defaults – resets your Gateway to it default settings
• Reboot Router – restarts your Gateway
• MAC Cloning – clones the MAC address
• ARP Table – displays active devices with their IP and MAC addresses
To Next Page
Loading...
