Copyright © 2016 Frontier Communications. All Rights Reserved.
1. In the Action column, click the Edit icon. The DNS Entry page
displays.
2. Edit the settings.
3. Click Apply to save the changes.
8.2b/ DNS SERVERYou can edit the host name and/or IP address, if
the host was manually
added to the DNS table. If not, you can only modify the host name.
To access the DNS server:
1. Select DNS Server in the Advanced page.
2. To view and add computers stored in the DNS table, click Add DNS
Entry. The Add DNS Entry page displays.
3. In the Host Name field, enter the name of the computer, then enter
the IP address and click Apply to save changes. The DNS Server
page displays.
4. To edit the host name or IP address, click the Edit icon in the Action
column. The DNS Entry page displays. Edit the host name and/or
IP address, then click Apply to save changes.
5. To remove a host from the DNS table, click the Delete icon in the
Action column.
8.3/ NETWORK SETTINGSYou can configure the following
network settings:
• Network Objects – define a group, such as a group
of computers
To Next Page
Loading...
