Copyright © 2016 Frontier Communications. All Rights Reserved.
3. Click Network.
4. Verify that Ethernet, located in the list on the left, is highlighted and
displays Connected.
5. Click Assist Me.
6. Follow the instructions in the Network Diagnostics Assistant.
2.1b/ CONNECTING OTHER COMPUTERS & NETWORK DEVICES You
can connect your Gateway to other computers or set top boxes
using an Ethernet cable, wireless connection (Wi-Fi), or coaxial cable.
ETHERNET
1. Plug one end of an Ethernet cable into one of the open yellow
Ethernet ports on the back of your Gateway.
2. Plug the other end of the Ethernet cable into an Ethernet port on the
computer.
3. Repeat these steps for each computer to be connected to your
Gateway using Ethernet. You can connect up to four.
COMPUTER NETWORK CONFIGURATION
CONNECTING A WI-FI DEVICE USING WPS
Wi-Fi Protected Setup (WPS) is an easier way for many devices to set up
a secure wireless network connection. Instead of manually entering
passwords or multiple keys on each wireless client, such as a laptop,
printer, or external hard drive, your Gateway creates a secure wireless
network.
To Next Page
Loading...
