Copyright © 2016 Frontier Communications. All Rights Reserved.
6.1b/ DISABLE ACCESS CONTROL
You can disable an access control and enable access to the service
without removing the service from the Access Control table. This can
make the service available temporarily and allow you to easily reinstate
the restriction later.
• To disable an access control, clear the check box next to the service
name.
• To reinstate the restriction, select the check box next to the service
name.
• To remove an access restriction, select the service and click Remove.
The service is removed from the Access Control table.
6.2/ PORT FORWARDING
You can activate port forwarding to expose the network to the Internet
in a limited and controlled manner. For example, enabling applications,
such as gaming and voice, to work from the local network as well as
allowing Internet access to servers within the local network.
To create port forwarding rules:
1. From the Firewall page, select Port Forwarding. The Port Forwarding
page opens with the current rules displayed.
To Next Page
Loading...
