Copyright © 2016 Frontier Communications. All Rights Reserved.
your Gateway assigns a default name to the client, if the
DHCP client has no host name.
4. Click Apply to save changes. DHCP CONNECTIONS
You can view a list of the connections currently assigned and
recognized by the DHCP server. In addition, you can add a new
connection with a fixed IP address.
Note: The fixed IP address of a device is assigned to the MAC address of
the
network card installed on the network computer. If this network card is
replaced, you must update the device entry in the DHCP Connections list with
the MAC address of the new network card.
To view a list of computers:
1. On the IP Address page, click Connection List.
DATE AND TIME
2. To define a new Static Connection with a fixed IP address, click Add
Static Connection.
3. Enter the host name.
4. Enter the fixed IP address to be assigned.
5. Enter the MAC address of the network interface of the computer used
with this DHCP static connection.
6. Click Apply to save changes.
8.5/ DATE AND TIME
You can configure the following settings:
To Next Page
Loading...
