Copyright © 2016 Frontier Communications. All Rights Reserved.
computer to use dynamic IP addressing:
1. In the Control Panel, locate Network and Internet, then select View
Network Status and Tasks.
2. In the View your active networks – Connect or disconnect section,
click Local Area Connection in the Connections field. The Local
Area Connection Status window displays.
3. Click Properties. The Local Area Connection Properties window
displays.
4. Select Internet Protocol Version 4 (TCP/IPv4), then click Properties.
The Internet Protocol Version 4 (TCP/IPv4) Properties window
displays.
5. Click the Obtain an IP address automatically radio button.
6. Click the Obtain DNS server address automatically radio button, then
click OK.
7. In the Local Area Connection Properties window, click OK to save the
settings.
8. To configure Internet Protocol Version 6 (TCP/IPv6) to use dynamic IP
addressing, repeat step 1 to 7. However for step 3, select Internet
Protocol Version 6 (TCP/IPv6) in the Properties option (refer to
IPv6 section for Gateway configuration).
MACINTOSH OS X
1. Click the Apple icon in the top left corner of the desktop. A menu
displays.
2. Select System Preferences. The System Preferences window displays.
To Next Page
Loading...
Need help?
General
