Copyright © 2016 Frontier Communications. All Rights Reserved.
WIRELESS ACCESS POINT CONNECTION AND
BROADBAND ETHERNET/COAX CONNECTION
– Manual - allows you to manually set the MTU 3. Click Apply to save
changes.
5.4/ BROADBAND ETHERNET/COAX CONNECTION
A Broadband Ethernet connection connects computers to your
Gateway using Ethernet cables. The connections are either direct or use
network hubs and switches.
A Coax connection connects devices, such as set-top boxes, to your
Gateway using a coaxial cable.
Note: If disabling the connection, you must reboot your Gateway for the
change to take effect.
To view the connection:
1. In the Network Connections page, click the Broadband Connection
(Ethernet/Coax) link.
To Next Page
Loading...
