Copyright © 2016 Frontier Communications. All Rights Reserved.
• Low Capacity Notification Enabled – activates low capacity
notification. This works in conjunction with the Allowed Capacity before
Email Notification and System Log Buffer Size.
CONFIGURATION SETTINGS
• Allowed Capacity before Email Notification – specify the capacity
before an email notification is sent.
• System Log Buffer Size – specify the size of the system log buffer.
• Remote System Notify Level – specify the type of information, such as
none, error, warning, and information, received for remote
system logging.
8. In the Auto WAN Detection section, specify the DHCP timeout.
9. Click Apply to save changes.
8.6c/ ETHERNET PORT CONFIGURATION
Ethernet port configuration allows you to set up the Ethernet ports as
either full- or half-duplex ports, at either 10 Mbps, 100 Mbps, or 1000
Mbps.
To configure the ports:
1. Select Port Configuration in the Advanced page.
2. To emulate the speed and duplex configuration of the port with which
it’s communicating, select Auto or select the port speed and
duplicity.
3. Click Apply to save changes.
To Next Page
Loading...
