Copyright © 2016 Frontier Communications. All Rights Reserved.
Lifetime field, specify the length of time required before
reentering a user name and password after your Gateway has
been inactive. In the Configure a Number of Concurrent Users
field, select the number of users that can access your Gateway at
any time.
4. Select Remote Administration to configure the remote administration
to your Gateway.
5. In the Management Application Ports section, change the primary and
secondary HTTP management ports.
6. In the System Logging section, configure the following system log
options:
• Enable Logging – activates system logging.
• Low Capacity Notification Enabled – activates low capacity
notification. This works in conjunction with the Allowed
Capacity before Email Notification and System Log Buffer
Size.
• Allowed Capacity before Email Notification – specify the capacity
before an email notification is sent.
• System Log Buffer Size – specify the size of the system log buffer.
• Remote System Notify Level – specify the type of information, such as
none, error, warning, and information, received for remote
system logging.
7. In the Security Logging section, configure the following security
logging options:
To Next Page
Loading...
