EasyManua.ls Logo

Frontier fios - Are My Gateway’s Ethernet Ports Auto-Sensing?; Wireless Option Is Activated?

Frontier fios
163 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Copyright © 2016 Frontier Communications. All Rights Reserved.
WIRELESS OPTION IS ACTIVATED?
Yes, with the unique WPA2 (Wi-Fi Protected Access II) key that is
printed on the sticker on the side of your Gateway.
10.1e/ WHICH CONNECTION SPEEDS DOES MY GATEWAY
SUPPORT?
The Ethernet WAN Internet connection supports 10/100/1000 Mbps.
The LAN Ethernet connections support 10/100/1000 Mbps. The
802.11ac wireless connection supports up to 1300 Mbps and the
802.11n supports up to 450 Mbps, depending on signal quality. The
Coax (MoCA 2.0) connection supports 700 Mbps.
10.1f/ ARE MY GATEWAY’S ETHERNET PORTS AUTO-SENSING?
Yes. Either a straight-through or crossover Ethernet cable can be used.
10.1g/ CAN I USE AN OLDER WIRELESS DEVICE TO CONNECT TO MY
GATEWAY?
Yes, your Gateway can interface with 802.11b, g, n, or ac devices. Your
Gateway can be setup to handle only n wireless cards, g wireless cards,
b wireless cards, or any combination of the three.
FREQUENTLY ASKED QUESTIONS
10.1h/ CAN MY WIRELESS SIGNAL PASS THROUGH FLOORS, WALLS,
AND GLASS?
The physical environment surrounding your Gateway can have a
varying effect on signal strength and quality. The denserthe object,
such as a concrete wall compared to a plaster wall, the greater the
interference. Concrete or metal-reinforced structures experience a

Table of Contents

Related product manuals