Copyright © 2016 Frontier Communications. All Rights Reserved.
higher degree of signal loss than those made of wood, plaster, or glass.
10.1i/ HOW DO I LOCATE THE IP ADDRESS THAT MY COMPUTER IS
USING?
In Windows 7, click the Windows button and select Control Panel, then
click View Network Status and Tasks. In the next window, click Local
Area Connection. In the Local Area Network Connection Status window,
click Details.
On Mac OS X, open System Preferences and click the Network icon. The
IP address displays near the top of the screen.
10.1j/ MY COMPUTER CANNOT CONNECT TO THE INTERNET USING
MOCA. WHAT SHOULD I DO?
A computer cannot be connected directly using a coaxial cable. It must
go through a MoCA bridge to connect. The bridge converts the coax
(MoCA) signal to an Ethernet signal the computer can understand. The
FiOS Gateway has an integrated MoCA bridge.
First, check the connection and verify all cables are connected correctly.
Then verify the Gateway is still connected and check the Ethernet
connection to the Gateway from the computer.
10.1k/ I USED DHCP TO CONFIGURE MY NETWORK. DO I NEED TO
RESTART MY COMPUTER TO REFRESH MY IP ADDRESS?
No. In Windows 7, unplug the Ethernet cable or wireless card, then plug
it back in.
10.1l/ I CANNOT ACCESS MY GATEWAY GUI. WHAT SHOULD I DO?
If you cannot access the GUI, verify the computer connected to your
Gateway is set up to dynamically receive an IP address.
To Next Page
Loading...
