Copyright © 2016 Frontier Communications. All Rights Reserved.
You should also see the IPv6 address for all IPv6 supported devices on
your local network displayed on the My Network page and under the
Broadband Connection (Ethernet/Coax) Properties as shown on the two
pages below.
STATIC - WAN IPv6 ADDRESS CONNECTION
The IPv6 WAN Static configurations are IPv6 settings that you enter
manually. These specific IPv6 addresses and settings are not expected
to change frequently.
1. To configure IPv6 WAN Static mode, select the Static option on the
IPv6 Configuration Control Page as shown below:
2. Specify the Static method to be used to obtain your WAN IPv6
Address by entering:
• IPv6 WAN Configuration (select Static) as shown in drop- down list
and page below:
3. After entering all appropriate IPv6 settings click Apply to have
changes take effect.
STATIC - WAN IPv6 ADDRESS CONNECTION
To Next Page
Loading...
