Copyright © 2016 Frontier Communications. All Rights Reserved.
1. On the Advanced Settings page, locate the Level 2 section and click
the 802.11 Mode link. The 802.11 Mode page displays.
2. Select the 2.4 GHz Wireless Mode as follows:
• Compatibility – This is the default mode setting, providing a
good balance of performance and compatibility with existing
wireless devices. 802.11b, g, and n devices can connect.
• Legacy – For older wireless devices. Only 802.11b and g devices
can connect. 802.11b (legacy mode) will cause your wireless
network to slow and is not recommended.
• Performance – For newer wireless 802.11n devices only. No
other devices can be used.
3. Select the 5 GHz Wireless Mode as follows:
• N and AC Mode – This is the default setting. Both 802.11n and
802.11ac are available on the 5 GHz frequencies.
• AC Only Mode – This provides maximum performance. 802.11ac
devices will have exclusive use of the 5 GHz frequencies and
802.11n devices will not be able to connect at 5 GHz.
4. Click Apply to save the changes.
3.6/ OTHER ADVANCED WIRELESS OPTIONS
You can view additional wireless options.Comment: Recommend leaving
defaults as is unless otherwise directed.
To view the options:
To Next Page
Loading...
