Copyright © 2016 Frontier Communications. All Rights Reserved.
To view users:
1. Select Users in the Advanced page.
2. In the Login Configuration section, enter the maximum number of
unsuccessful login attempts.
3. To edit usernames and passwords, click the Edit icon in the Action
column. The User Settings page displays.
UTILITIES
4. To edit the username and set a new password, as needed.
5. To add a new user, specify the following parameters:
• Full Name - name of the user.
• User Name – name the user enters to remotely access the
home or office network. This field is case-sensitive.
6. To set a new Password, select the Set a new password check box.
The New Password fields display.
7. Verify the level of access for the user in the Permissions field.
8. Click Apply to save changes. The Users page opens with the user
information displayed.
9. Click Apply again to save changes and exit.
8.1g/ LOCAL ADMINISTRATIONYou can grant local access on a
specific port. To grant access:
1. Select Local Administration in the Advanced page.
To Next Page
Loading...
