Copyright © 2016 Frontier Communications. All Rights Reserved.
Note: Your Gateway’s recommended wireless security encryption is set to
WPA2. This is the factory default.
This section explains how to activate WEP (Wired Equivalent Privacy)
wireless security. WEP is a significantly less robust security compared to
WPA or WPA2 and is not recommended. To set up WPA2 wireless
security, refer to the WPA2 section.
To configure basic security to WEP:
5. To turn on WEP (Wired Equivalent Privacy) security, click the WEP
radio button.
6. Select a WEP security level as 64/40 bit or 128/104 bit.
To Next Page
Loading...
