Copyright © 2016 Frontier Communications. All Rights Reserved.
• Event Type - consists of firewall information, firewall setup, and
system log
• Log Level - describes the event that occurred, such as a fragmented
packet or parental controls.
• Details - provide a reason the event occurred, such as a packet has
been blocked because of parental controls. You can modify the
type of events that display in the security log. This does not
modify the event itself. It simply changes the information that
displays in the log. 6.7a/ EVENT TYPES The security log records
the following event types:
• Access control – a packet has been accepted/blocked due to an access
control rule.
• Advance filter rule – a packet has been accepted/blocked due to an
advanced filter rule.
• ARP – an ARP packet has been accepted.
• AUTH:113 request - an outbound packet for AUTH protocol has been
accepted (for maximum security level).
• Broadcast/Multicast protection – a packet with a broadcast/ multicast
source IP has been blocked.
The security log reports the following information:
SECURITY LOG
• Default policy – a packet has been accepted/blocked according to the
default policy.
To Next Page
Loading...
