Frontier fios User Manual

Copyright © 2016 Frontier Communications. All Rights Reserved.
3. Enter the service name then configure its inbound and outbound
trigger ports. Click Apply to save User Defined changes. The Port
Triggering page displays. 
4. Click Apply again to save all changes. 
6.4/ DMZ HOST
DMZ Host allows a single device on your primary network to be fully
exposed to the Internet for special purposes like Internet gaming.
DMZ HOST
Warning: Enabling DMZ Host is a security risk. When a device on your
network is a DMZ Host, it is directly exposed to the Internet and loses much
of the protection of the firewall. If it is compromised, it can also be used to
attack other devices on your primary network.
Follow these steps to designate a device on your primary network as a
DMZ Host:
1. From the Firewall page, select DMZ Host 
2. Select Enable for the DMZ Host 
3. Enter the IP address of the device you want to designate as the DMZ
Host 
4. Click Apply 

Frontier fios Specifications

General

Phone Ports	2
Wi-Fi Standards	802.11ac
Ports	Ethernet, Phone, USB
Ethernet Ports	4
USB Ports	1
Wi-Fi Bands	2.4 GHz and 5 GHz
Security	WPA2