Copyright © 2016 Frontier Communications. All Rights Reserved.
• Confirm that the computer and Gateway are both on the same
network segment. If unsure, let the computer get the IP
address automatically by initiating the DHCP function, then
verify the computer is using an IP address within the default
range of 192.168.1.2 through 192.168.1.254. If the
computer is not using an IP address within the correct IP
range, it will not connect to your Gateway.
• Verify the subnet mask address is set to 255.255.255.0.
10.0d/ TIMEOUT ERROR OCCURS WHEN ENTERING THE URL OR IP
ADDRESS
Verify the following:
• All computers are working properly.
• IP settings are correct.
• Gateway is on and connected properly.
• Gateway settings are the same as the computer. 10.0e/ FRONT
LIGHTED INDICATORS Flash Speed
• Slow flash – Two times per second
• Fast flash – Four times per second Power/Internet Light
• Slow flash white – Gateway is starting
• Solid white – Gateway is powered on and connected to the Internet
• Slow flash red – Gateway has malfunctioned