Copyright © 2016 Frontier Communications. All Rights Reserved.
Note: When restoring defaults, the setting and parameters of your Gateway
are restored to their default values. This includes the Administrator
password. A user-specified password will no longer be valid.
To restore your Gateway’s factory default settings:
1. Select Restore Defaults in the Advanced page.
UTILITIES
2. To save your current configuration file, click Save Configuration File.
3. To restore the factory default settings, click OK. The factory default
settings are applied and your Gateway restarts. Once complete,
the Login page for the First Time Easy Setup Wizard displays.
8.1c/ REBOOT GATEWAY
You can reboot your Gateway using the Reboot Router feature as well
as pressing and holding the WPS button on the front of the Gateway for
at least 10 seconds.
To reboot your Gateway:
1. Select Reboot Router in the Advanced page.
2. To reboot, click OK. Your Gateway reboots. This may take up to a
minute.
3. To access your Gateway user interface, refresh your web browser.
When replacing a network device on your Gateway, you can simplify
the installation process by copying the MAC address of the existing
device to your Gateway.
To Next Page
Loading...
