Copyright © 2016 Frontier Communications. All Rights Reserved.
• Channel - displays the channel the wireless connection is currently
using.
• Security Enabled - displays the type of security active on the wireless
connection as well as the security encryption key.
• SSID Broadcast - displays whether your Gateway is broadcasting its
SSID. If activated, the SSID of your Gateway wireless network is
broadcast wirelessly. If not activated, the SSID is hidden and the
wireless clients must be manually configured to use the SSID.
• MAC Authentication - displays whether your Gateway is using MAC
(Media Access Control) address authentication to allow wireless
devices to join the network.
• Wireless Mode - displays the types of wireless device that can join the
network.
• Packets Received/Sent - displays the number of packets received and
sent since the wireless capability was activated.
3.2/ BASIC SECURITY SETTINGS
You can configure the basic security settings for your Gateway’s
wireless network.
• WMM - displays if WMM is enabled on your Gateway.
WIRELESS STATUS AND BASIC SECURITY
SETTINGS
To Next Page
Loading...
