Copyright © 2016 Frontier Communications. All Rights Reserved.
BASIC SECURITY SETTINGS
2. To activate the group key update interval, select the Group Key
Update Interval check box and set the interval time in seconds.
3. Click Apply to save the changes.
WPA2
If WPA2 (Wi-Fi Protected Access II) was selected, the WPA2 page
displays.
To set the WPA2 security:
1. Enter the Pre-Shared Key.
2. To activate the group key update interval, select the Group Key
Update Interval check box and set the interval time in seconds.
3. Click Apply to save the changes.
Warning: WEP provides a low level of security and is not recommended.
Additionally, the WEP security setting will drop your Gateway’s wireless
performance to a maximum data rate of 54 Mbps, and will disable Wi-Fi
Protected Setup (WPS). WEP should only be enabled if you have wireless
client devices that don’t support WPA or WPA2.
WEP
If WEP was selected, the WEP Settings page displays.
To Next Page
Loading...
