Copyright © 2016 Frontier Communications. All Rights Reserved.
2. To save the current configuration to a file, click Save Configuration
File. The configuration file is saved to you web browser’s
download folder.
3. To load a previously saved configuration file, click Load Configuration
File. Browse to the location of the file, then click Apply to begin
the configuration uploading process. Your Gateway will
automatically restart with that configuration.
8.6b/ SYSTEM SETTINGSYou can configure various system and
management parameters. To configure system settings:
1. Select System Settings in the Advanced page.
• Wireless Broadband Route’s Hostname – enter the host name or URL
address of your Gateway. Both names are the same.
• Local Domain – view the local domain of the network.
3. In the Wireless Broadband Router section, configure the
following by selecting the check box:
2. In the Router Status section, configure the following:
To Next Page
Loading...
