Copyright © 2016 Frontier Communications. All Rights Reserved.
3. View the following options:
Caution: These settings should only be configured by experienced network
technicians. Changing the settings could adversely affect the operation of
your Gateway and your local network.
WIRELESS SETTINGS
• Group Key Update Interval – time interval used to update the WPA
shared key (used to generate the group key)
• Transmission Rate – displays status as Auto
• Channel Width – Controls the bandwidth of the wireless signal
• Transmit Power – adjusts the power of the wireless signal
• CTS (Clear to Send) Protection Mode – allows mixed 802.11b/g/n/ac
networks to operate at maximum efficiency
• CTS Protection Type – displays cts, which is only for mixed
802.11b/g/n/ac networks or rts_cts, which is for 802.11a/b/g
networks
• Frame Burst – Max Number – allows packet bursting, which increases
overall network speed
• Frame Burst – Burst Time – indicates the burst time of the frame
bursts
• Beacon Interval – displays the time period of the beacon interval
• DTIM (Delivery Traffic Indication Message) Interval – provides a
countdown mechanism, informing wireless network clients of the
next window for listening to broadcast and multicast messages
To Next Page
Loading...
