Copyright © 2016 Frontier Communications. All Rights Reserved.
The request access is defined as:
• Blocked traffic - no access allowed, except as configured in Port
Forwarding and Remote Access
• Limited - permits only commonly used services, such as email and
web browsing
• Unrestricted - permits full access of incoming traffic from the Internet
and allows all outgoing traffic, except as configured in Access
Control
1. From the Firewall General settings page click on desired IPv6 option
to configure IPv6 security:
6.0b/ SPECIFYING GENERAL SETTINGS FOR IPV4 OR IPV6 To set your
firewall configuration:
To Next Page
Loading...
